fatbastard

Bump with another price drop

You can find some of the specs here; http://www.savagearms.com/firearms/model/12bvss Savage Model 12 BVSS in 22-250. Fluted bull barrel, stainless, accu trigger. This one has a Barska 6x24x44 IR optic. I only shot this to make sure it was good to go, and it shoots nice. I don't have a need for another caliber bolt gun, don't shoot bench or varmint, so I'm letting it go. Comes with 2 and a half boxes of Winchester ammo. Asking $700 Reply to the thread or pm me with a cell number that i can text. Located in Tucson, but I am mobile for work so I can meet up. Been getting to Phoenix about once a week for work lately also.

I dug out some more stuff from the .50 that went away and have decided to list it all together. I listed the case a few months ago and got no hits, so the price is down considerably. Projectiles, brass and powder are also up this time. I will sell the case separate from the rest. Powder, brass and projectiles must sell together. First up is the case.Fully welded corners, 4 latches with a locking rod that goes through all of them. The foam is un cut. Has rubber seal around the entire opening. Full length hinge. has some scuffs and a small ding, very minor. measures 62" long by 12" wide by 61/2" deep. 40 Brass cases in ammo boxes with foam. I don't know anything about them except they appear to be fresh off the military range. Not clean and primers crimped in. Pretty much just throwing these in, I don't know if they can be used or not. 4 boxes of 20 Barnes 50 cal .510 diameter 750 gr Lrs projectiles. 3 1Lb. cans Hogdon 50 bmg powder. Still sealed. Asking $150 for the case (paid $400 new) * SPF * projectiles, powder, and brass ( that's less than what just the projectiles cost) Not interested in shipping any of it. Local is Tucson but I have been getting to Phoenix about once a week for work, Sierra Vista too. I am A mobile technician so I can jockey my schedule to meet up. PM me a cell# and we can talk.

2 of these are now for sale as complete rifles. The stainless barreled crowned .458 was paired with an Anderson lower, DPMS parts kit, A2 stock. Aking price is $700 for the complete rifle. The .50 beowulf was paired to an Anderson lower, DPMS parts kit, adjustable stock tube with a Fab Defense GL shock stock and a Zombie green Ergo grip. Asking price is $800 obo for the complete rifle, dies, and a box of ammo.

I have some big bore AR-15's that I need to move. Everything is new unless noted. MGI says they test fire every barrel before shipping, Satern makes no such claim. Asking price is below retail on all of the components and below what you can get equivalent uppers for on line from what I found. .458 Socom complete, assembled upper minus the crush washer (Hope to have one in a day or two) MGI 16" Medium profile barrel and bolt. Troy gas block and carbine length tube Brownells carrier (likely made by Anderson) Strike Industries chg handle (extended release not ambi) YHM 12.5" "smooth" handgaurd unknown mfg slick side upper (ejection port relieved and flat black cera kote touched up) unknown mfg stainless muzzle break. Asking $700 .458 Socom complete rifle Satern barrel and bolt. Heavy profile stainless crowned (no threads) Troy gas block and carbine length tube Brownells carrier YHM 12.5 "Smooth" handgaurd Unknown mfg charge handle (gently used) Unknown mfg slick side upper (ejection port relieved and flat black cera kote touched up) *Edit for update, please read the next post* 12.7 X 42 (.50 Beowulf) complete rifle Satern barrel and bolt Troy gas block Brownells carrier Strike Industries charge handle (extended release not ambi) Unknown mfg slick side upper Guntech comp/flash hider Local is Tucson. I have been getting to Phoenix about once a week and Sierra Vista for work and can meet up there also. I can text pics of any or all if you pm me a cell #.

Update I happened upon a box of .50 beowulf ammo, so that one is going to the builder. The box of ammo will be included in the sale of the complete upper. Make it a complete rifle with one of my lowers and a brand new set of Lee dies will be included as well. First one to jump on either one of the .458 Socom uppers and make it a complete rifle with one of my lowers will also receive a brand new set of Hornady dies for it as well.

Bump with a price drop.

just like this; https://www.amazon.com/Camp-Chef-Expedition-Stove-Griddle/dp/B0035O37DU Used on 2 trips, Its just too much stove for me and mine so I went with a ranger instead. Comes with carry bags for both stove and griddle. ASKING $100 Located in Tucson, can meet around town on most days. reply or pm with a cell # I can text

Yumm, my size. U sure you dont want to trade? I got a bunch of good stuff in the classifieds here.

Bump for trades, partial trades, offers? see the Big case thread for what I'm looking for in trade please

Got a few new in box air hammers for you contractors or diy ers. I have the receipts, they have never been used and a few have never been opened. I opened most for pictures. I'm not going to use them and need some cashola. Pricing them to move. Hitachi n5008 ac2 stapler- $150.00 Hitachi nv65ah2 nailer- $300.00 Hitachi nr90ae nailer- $150.00 Bosch sn350 20f nailer- $150.00 Bosch fna250 15 nailer- $200.00 Bosch rn175 nailer- $200.00 Reply or message me a cell number and we can set up a meet. I get all over Tucson and I have been going to phx at least once a week lately.

Bump for offers, trades, partial trades. See the big case thread for what Im looking for.

I have 200 new Starline 45-100 (45-2.6) cases. $150.00 250 new Starline 50-90 cases. Asking $275.00 Approximately 475 fired, uncleaned 45 win mag cases. All appear to be Winchester. $50.00 Approximately 200 new Winchester 45 win mag cases. $40.00 32 fired, uncleaned Hornady 405 Winchester. $10.00 50 fired, decapped, uncleaned 458 Lott cases. Sold 20 fired, uncleaned 7mm wsm. These are nickle plated Winchester Supreme. Sold Reply or pm me with a cell # and we can set up a meet. I'm in Tucson, travel to phx for work once a week also.

Bump for trades or partial trades, offers. Looking for: 458 socom brass, ammo or dies RCBS, Redding, or Hornady AR 15 hangaurd, bolt carrier, stripped upper, metal flip up sights, or nice trigger. Semi Auto .22 pistol (mkII, III, or 22/45 preffered) Non military .308 brass or ammo or dies mentioned above 10 mm brass or ammo .40 cal 1911 mags .357 sig brass, ammo or dies mentioned above Cool stock for 10/22 like Magpul or Archangel Try me

Was used to transport a .50 bmg in a previous life. The rifle is gone and the case needs to go too. Fully welded corners, 4 latches with a locking rod that goes through all of them. The foam is un cut. Has rubber seal around the entire opening. Full length hinge. has some scuffs and a small ding, very minor. measures 62" long by 12" wide by 61/2" deep. Asking $250.00 Reply or message me a cell number and we can set up a meet. I get around tucson every day and get to phx once a week at least for work.

Will do. Thanks

Open box Hornady .375 225 gr sp #3706 qty 49. $15.00 Hornady 405 Win (.411) 300 gr sp #41051 qty 50. $20.00 Woodleigh 500 Nitro .510 450 gr rn sn qty 25. $25.00 Barnes Triple shock 7mm .284 160 gr #28446 qty 50. $25.00 Hornady 45 cal 350 gr #4502 458 round nose qty 50. $20.00 Barnes #62020 600 nitro 900gr solid. (I know, right?) qty 20 $35.00 Box of 20 Winchester Spureme 7mm WSM 160 gr Fail safe loaded ammunition qty 20 $30.00 Reply or pm me a cell number and we can set up a meet. I'm in Tucson, travel to Phx. once a week for work lately also.

Bump Price drop to 225$ obo Need it gone

Its branded The Case Place out of Arlington, Texas. I have seen the exact same case branded Magnum research as well, so I don't know who actually makes them.

MDT chassis.

Selling The Accu Stock, bottom metal and magazine from a Savage Model 10 FCP-SR. These are take offs from an unfired rifle.The gun came out of the box and went straight to project mode. Short action, .308 with hvy bbl and side bolt release. From what I have researched, these are sold without the accu stock as well for a little lower price, so if someone out there has one and wants an upgrade and a spare mag here is your chance. MSRP on these mags is pretty silly at $79. I don't think the stock is worth much more than that so I'm asking $150 for all of it. Screws aren't pictured but are included. PM me a phone number and we can meet up. I'm in Tucson but travel to Phx area for work once a week lately.

Bumpin it for the guys who have been out hunting

Responded, not getting email notifications of pms or thread posts so sorry it was a little late.

Sold. Thanks guys.

Bump, price drop.