fatbastard

I have 2 pretty rare bottles that I would like to be rid of as I am not a collector. Value is tough to determine but I am willing enough to see them go away and I know that my options for doing so are very limited. First up is a Fall 2007 Buffalo Trace Antique Collection Sauzerac. Info in the pics. Second, I have a bottle of Jimmy Hendricks Vodka. The story behind this one is that they were produced and distributed without permission of the Hendricks estate and a lawsuit put an end to that. This is one that survived untouched the un-distribution and destruction. Open to trades of Hunting gear and or XJ parts. 2007 Sazerac Rye 18 Year-Old.pdf

Ammo trades are acceptable in those calibers and a few others, I could use "more than a few" boxes. Also looking for: Binos Trijcon RMR A set of factory Rubicon wheels/tires (2004 ish? with 5 on 4.5 pattern). An NP 241 with SYE. A Dana 30 that I can build and swap out for my front. A Glock Gen 3 (21, 34, or 40) A 1911 in 10mm or .45 A Remington semi auto in 12g or a 700 bolt in .308 or 300 Win Mag. Etcetera

These are un opened so, no samples. I do have an open bottle of George T Stagg of similar vintage that we could celebrate striking a deal with though. Located in Tucson but I have plenty of work scheduled in Phoenix/Tempe over the next few weeks.

I had the same troubles. I was crushing hollow points trying to crimp and seat in one shot. I did get it eventually, (thanks to advice from those here on the forum) but the easy button is to seat and crimp in separate steps. Find out how much crimp your gun likes and only use the minimum. Aaaand if you are not into reloading, you know where to drop off your brass

Just looking to see if anyone local has some they would like to be rid of. I am looking for 200 or so but I would meet up for a box or two if it were convenient enough. I get around Tucson pretty regular every day. I have work scheduled in Mesa- Tempe on Monday. In case you were looking for 375 H&H brass we could trade I have around 300, most are new. I still have approx 50 .405 Win cases too and a box of projos.

PM sent. Thanks guys, looks like I will have plenty.

1800 Available New Lake City 2009 head stamped .223/5.56 brass $125 per 1000 $65 per 500 $15 per 100 2000 available New IMI 7.62X39 $165 per 1000 $85 per 500 $20 per 100 Located in Tucson. I get to Phoenix for work usually once a week. Will also ship flat rate on buyers dime. Shoot me a PM with a cell I can text.

Quantity edit, bump.

pic shows a Palmetto State

From a relatives estate. Features a camo synthetic stock, stainless barrel, fiber optic sights, and a Pentax gameseeker 4x12 optic. Asking $200 OBO

Sorry guys. Don't know how I missed all of this. It is still available. I have a deal in PM pending and will get back to all of you soon. Located in Tucson.

I went by the shop I mentioned earlier in the thread. It's called Blade Runner now. Different guy at the helm, same place. Diverse inventory as usual. I didn't need anything sharpened but I saw a guy bring in a box of fixed blades. Pretty sure he told him 20 dollar charge and he could wait for them or come back later in the day. I saw him sharpen his own knife while I was browsing and it took all of 5 minutes. Google them for business hours, they are not conventional.

I use Magpuls on a lot of my rifles, "tacticool" shotguns, and all of my AR's. I think they make a padded version if you are into that sort of thing. I like the fact that you can buy the base version (MS2 2 point) and buy the parts separate to make it QD and or single point. I also have a Troy single point that doesn't get used very often because it's just single point. There will be a time and place where you want single point, but not often hiking around.

In case you want to put the cart in front of the horse, I think I still have a few hundred cases I will make a deal on.

There used to be a shop at Prince and Fairview that sharpened. Was going to run my kitchen knives down there soon, don't have any experience other than buying a few blades from the old guy.

Bumpity bump. Offers? I would love to turn this into Hoytman's 300 win mag. Will separate the handgaurd and some of the brass (my dad has the same rig and uses it) if needed.

According to the data, it will throw a 200 grain Barnes xpb at around 2400 fps at max. I think that's enough for anything big in North America depending on how close you feel like getting of course. An FYI, my other Satern barrel seems to perform great around max. My .450 Bushmaster makes a big ragged hole group at 100 yards with the Hornady 225 grain ftx in front of 38 grains of Lil' gun at around 2200 fps. It's the second most accurate gun I have and it's an AR, go figure. The bullet is not designed for that velocity but its half the price of published loads like the 200 and 250 grain Hornady bullets so its a fun, "cheap plinker" and I'm sure would get it done for anything I could encounter in the lower 48 and especially Az. The main reason I don't really have a need for this one.

Looks like my boy is going on his first Javalina hunt. Me, maybe not so much.

PM inbound

What is the screw spacing for the forend on this barrel?

Your link also goes to an empty shopping cart for the scope.

Aero precision sells parts, kits, and complete rifles with or without furniture in a variety of finishes. You can find good prices on blems from them too. Some of mine are Aero blems and I haven't had any issues with them. The blemished parts are not blemished enough for most people to notice and guaranteed to function equally. If you don't know what to look for, you are better off buying complete. If you don't know how or want to assemble and tune it, your best bet is to buy complete as well from a local authorized distributor of a reputable brand who can and will help you do so.

This seems to go most places I do.

I have had 2 of the Riton Optics red dots pass through my hands. I like them better than the the Vortex because of ease of use. I also have a Riton 1x4 illuminated reticle on my go to 300BLK that I like. My "deer rifle" also sports a Riton optic. I am not affiliated, I have paid full retail on 3 of the 4 I own. I do have a friend that works there though. Stopped in to see him today and he was showing me some really cool new stuff that they have coming out soon, 1x5 and 1x8, 30 or 34mm tube with reticle in the first or second focal plain. Designed with heavy influence from one of those gun writer guys who wants to torture them in Africa. Can't argue with the warranty either.

What length is the extra barrel for the Savage? If it is 20", would you consider a separate sale? I love my FCP-SR, I have the 24" and wouldn't mind shaving some weight though.