PRDATR

I've hunted it twice. http://www.gameandfishmag.com/hunting/hunting_whitetail-deer-hunting_rm_1105_01/

Point Guard is closed.

Portal wasn't too hard to setup when I did it a year or so ago but it does not show my 2015 or 2016 licenses only 2012/13/14.

Me too. Too bad it is not my rifle to put through it's paces. Being a hunting rifle, I am not sure how long it will take to go through the life cycle of the brass, if ever. There are 110ish cases. So that might last a long time. I am on the 7th to 8th firing on my 120 pieces of .300RUM brass, always loaded pretty hot. I was also at about 7 or 8 loadings on my .25-06 Ackley cases that were loaded really hot. 100 gr. @ 3600+ and 115s at 3400. I just bought 100 new Nosler brass 2 years ago after about 10 years of using the Remington brass. I used to get 6-7 loads out my 7-08 before the pockets would loosen up.

Where are you located Greg? My BIL's birthday is coming up.

I'll toss in Area-15 in Mesa.

Post it on The Powerstrokes of Arizona facebook page, 1100+ members.

Unless you're sitting on the beach in RP or SD I would advise against an inflatable one. The place we glassed from yesterday was a ridge and very little cactus but the pad I was using had the bottom covered with thorns and goat heads. I had to take a stick and scrape them all off.

Items Quantity (Binocular Repair) 1 (678-936A HINGE COVER - (Replaces 659-984A)) 1 (SENKKOPFSCHR, POLYSEAL) 1 (EYE CUP TWIST IN EL 8.5x42 & SLC 10x50) 2 (PLASTIC ARM) 2 (GEWINDERING) 1 (NEW COAT RIGHT 8.5X42) 1 (NEW COAT LEFT 8.5X42) 1 (659-978 BINOCULAR LOOP) 2 (659-954 ADHESIVE TAPE) 1 (HOUSING COVER RIGHT) 1 (HOUSING COVER LEFT) 1 (ADHESIVE STRIP) 1 (659-943 SWAROVSKI LOGO) 1 (659-947 HAWK) 1 (FOCUS HOUSING) 1 (FOCUS KNOB) 1 (659-940A RUBBER RING) 1 (OBJECTIVE SPRING - EL) 4 (RIGHT FOCUS LENS MOUNT) 1 (LEFT FOCUS) 1 I checked and they had them for 5 weeks.

Haven't heard anyone mention Reed in forever.

I use a foam pad I bought at Dicks and works great but this morning I was glassing with BigBrown and he had a pretty nice folding chair.

I sent in a pair of EL's last year mid summer and it was about a month turnaround. They replaced a bunch of parts and put on new skins. The only cost to me was shipping to them. They send me an itemized list of what they replaced and did.

Not me.

Next trip try Scotts.

Give Andrew a call at Bullet Proof Diesel in Mesa or Chris Rollins at Rowdy Racks also in Mesa.

I used a Fenix PD35 on low for hiking in and also have one of their headlamps. Great products.

Post a pic plz

4064 was Tubbs goto powder when he was shooting HP Silhouette.

It is usually at Morman Lake and sponsored by AZG&F and RMEF.

Great, now I'm going to be checking my account every hour. Congrats

Ford put all their eggs in one basket with the 6.0, and that didn't work out so well but the 7.3 option ended in 2003 here but was still be produced down under for 2004, maybe later. I have 278K on mine.

I read earlier today that they are calling people and have a lot of people yet to call.

http://www.winchesterguns.com/content/dam/winchester-repeating-arms/support/faq/serial-number-reference/Winchester-Manufacture-Dates-by-Year-2012-Scanned-Documents.pdf

Both Model 12's with modified chokes. The older one is turn of the century patent made in the late 20's, the other one was made in the early 50's. I hunt with it a lot but the older one needs to be disassembled and cleaned as the action is a bit sluggish.

Most people reply via a PM so as not to put info out about spots that can be uncovered with a google search.