L Cazador

Why do you question that? A bullet maker is rarely wrong about what they recommend. It is length not weight that is being stabilized.

Beautiful rifle! Great guy to do business with. Buy with confidence!

Great guy to deal with. Buy with confidence!

Where are you located?

Check out the Riton made here. For a $100 it's impressive. I've got Holosun, Burris, Vortex, and Sig. The Riton seems to outperform the others but don't know about longevity.

You cannot ship in that Ruger box only. No suggestion that there is a firearm inside is permitted. However you can ship in the Ruger box and then put that in another box. If you have a scope on your rifle it's best to remove it and bubble pack in another box. If you have to leave it on the rifle then you may want to buy a Plano SE scoped rifle case from Midway. They're about $40 and come in a cardboard box that you can use for shipping. Well worth the protection. UPS and Fed-Ex has recently changed their requirements. Check before you ship.

who did chamber?

Turnbull is the best if it involves an absolutely authentic restoration!

Regardless of what scope mounting system you buy, get your scope mounted correctly! Even the most expensive scope rings need to be lapped and fitted and scope bases need to bedded for proper fit!

Bad buffer spring.

What caliber and was that butt pad added and stock cut? Also 20 or 22 inch barrel? Also is original rear sight present? Depending on answers worth about $400-$600.

There will be plenty left at the post office when he ships in that flimsy flat rate box, LOL!!!

Weaver or Burris. Be sure to lap them.

A 9 twist better on brass? I've been shooting the 280A! since 1990. Always shot 165-170 weight bullets with 8 or 8.5 twist. Todays bullets are even longer and require 8-9 twist with 9 twist on the marginal side for best accuracy. I'm helping a friend put one together right and it'll be an 8 twist Brux on a Kelbly Atlas action. My advice to him was to buy Lapua 30/06 brass and neck down.

Why build a 280AI when you have a 7/08 shooting like that. 👍!

Before you do anymore testing measure head diameter and check for expansion. Anymore than .0008" over new brass is too hot. If you're under that measurement then you should be able to go up in .5 grain increments till you see that head expansion over .0008". What you think is .005" off the lands may be well into the lands. I wouldn't trust that measurement. If you're into the lands, that could drive pressure significantly. By the way did Phoenix Rifles make a barrel stub for you for measuring headspace and seating depth. Also did they give you a blueprint of the reamer specs they used on your rifle. It may not be too late to ask for this.

I'm with Lance on 130 grain bullets delivering best performance in the 6.5 Creedmoor. The cartridge designed after the old 300 Savage case, a shortened 308 is best off with 120-130 grain bullets. There just isn't enough powder room for a slow burning powder to properly deliver those heavy bullets. Frankly the 140 grain bullets gained popularity only because of the paper punchers where energy is of no consequence.

Easy peasy. Remove barreled action from stock. Put it in a vice trigger up. Remove bolt. Put safety in "on" position. Now drive the rear pin towards the left side just enough so the bolt release and spring clear the pin. Watch out for flying parts, namely the bolt release spring. A plastic bag around the whole thing will keep the spring from disappearing but not completely necessary. Now that you have removed the bolt release and spring you can drive the rear pin to the right till it exits. Now you're ready to remove the front pin and the trigger. The sear spring on the old trigger may come loose so keep that in mind. The Timney should be self contained and easy to move to the other rifle. Go to YOU TUBE for video.

Ace has spherical and flake powders. These powders are made here in the US by St. Marks in Florida. Being locally made powders their prices not going to contain the export/import taxes otherwise levied on extruded powders.

Great guy to deal with and he takes very good care of his firearms! Very happy with my purchase! Buy with confidence.

Why just 20 pieces? If you haven't tried it and are just checking to see how it will work, no worries, it's the best. Brunos had some in a couple of weeks ago and I thought I saw it at Sportsmans as well.

$40-45 a pound. Shipments of the extruded powders are starting to come in. Since none of the extruded powders are made here, it's hit and miss with shipments coming in. Looks like next fall before a lot of the extruded powder begins to catch up.

Ok #505 and #507 are both illuminated. 505 is 50mm and 507 is 56mm obj. .

Nightforce says C505 is illuminated. I'm confused, and don't trust optics planet. I'll wait to hear from owner.

I'll take it.