Siwash

another member has a lefty Hoyt as well a few pages back in the classifieds.

IMO they are pretty much all the same. I would look at Seaforth because they have free parking. Looking at recent reports it looks like the PM trips on the New Seaforth are not crowded either.

TTT

Nope, just this one, it was intended to be a loaner/backup but I switching up a few other set ups so this one is an odd man out.

I was quoted about $150 -200 tops parts/labor per rod if I provided the blank, which I did. I’m having a speed jig rod made and a UC 76 Viper for my Mak 20. If I like the work I will probably have a UC 76 Raptor made for my Mak 15. Some of the guys I fish with out of the LA area told me they were paying $300-350 plus the blank cost for their speed jigging rods…CA is just spendy.

PHX Fishing Supply is pretty reasonable. When my CJX 6004 is done I will post a pic. You can totally fish the XXXH rod up to 100#…its perfect with 80#

If you are looking for a speed jigging rod get a UC CJX 6003 blank and have it acid wrapped. If you get different reel with more line capacity the 6004 is the next step up…but it is for heavier use cases than you described. If you want a good stick to fish 50-60# with 20# max drag on your Fathom you could also buy this from me:

You could always try a portable bow press…would sell you one for 25$ TYD.

Spf I have 500 rounds of Federal .45 auto Gold Medal Match 185gr FMJ-SWC. 150 rounds are in plastic MTM 50 round cases. Two pigs shot with this round had exit wounds that looked like 1.5” broadhead…it just doesn’t cycle well in my Glock 21. Was lights out in a 1911 I used to own. $SPF. Would trade for 1k rounds of 12 or 20 gauge 7.5 or 8 shot. Located in midtown Tucson but will be in downtown PHX briefly midday 7.21. Thanks for looking.

https://diypestcontrol.com/pigeon-quail-trap would work too. They have a few retail stores in Tucson…its where I buy ground squirrel traps.

traded… Stumbled upon 1k rounds of Federal American Eagle (per email receipt in 2015) 55gr FMJ M193...in a plastic ammo box labeled "fishing lead" in my closet. It has been stored inside in AC since then and is head stamped with NATO marking and LC14. Just snagged one round out of the bag Thanks for looking.

For sale in Tucson: 1. Avet SX 5.3 with Magic Cast, spooled with 50# Daiwa JBraid on Okuma SCT 8’ 15-30 rod. Both are new/unused. Great flyline outfit. Sold 2. SPF New/unused Daiwa Proteus Boat rod 7’6” 20-50# mono, PTB76HF is the model,sold! https://charkbait.com/product/daiwa-2020-proteus-conventional-boat-rods/ .

TTT will be in PHX Saturday 7.15

Harris models that swivel are noted with a “S.”

All items for sale or trade or free in midtown Tucson: 1. Sold 56 ct Nolser Accubond 140 grain 6.5/.264 projectiles, Sold 2. SOLD: Force fins plus landing net 3. SOLD: Medley of Moultrie game cams, 6 total, including two homemade ammo can lockboxes and one unknown lock box. 4 are BC300I and two are D55IR. They all come with memory cards. They all need new batteries, one has a D cell stuck in it. $35 SOLD 4. Bowmaster portable bow-press, $25 $15 5. Heavy Duty homemade outboard motor stand, approx 40" tall, 24" wide and 26" long on casters. Used with a long shaft 25hp Mercury 2 stroke that probably weighed 110-120#, no issues, would probably hold 150#+ no problem. $50 $sold 6. Black & Decker hand drill and jigsaw, both work, GONE pending pick up 7. Vortex Ball head, FREE 8. Remington 12gauge Pro Bore Imp. Mod choke, GONE 9. Therma-Rest lounge chair. You put your air matress in this and it becomes a nice chair. Probably only works with the older squared edge/rectangular Therma-rests...GONE pending pickup 10. Vintage Rockhopper FS Comp 17" mtn bike, the Ritchey Pro Logic Nitranium frame has value for anyone into building retro bikes. Commuter condition now, not trail ready, comes two two spare tubes and a front lamp/rear blinker, probs have an old U-lock you can have too, and a pink ladie's helmet if your are into that look. $150. This is on CL too $100 11. Vortex 30mm Bubble level $10, unused: https://vortexoptics.com/bubble-level-30mm-tube.html Would gladly trade any of the sale items for 12/20 gauge bird shot or steel shot or Hornady ELDX in .30 cal/.264/.243 Thanks for looking.

TTT for draw results 1. Free Vortex Ball head 2. $10 Vortex 30mm Scope Bubble Level 3. $15 bowmaster pocket bow press with split limb adapters 4. $100 specialized rockhopper with front shock, someone buy this for their kid in college... 5. $40 steel outboard motor stand, don't think you could source materials for this at $40...

Got hit for two crane tags last night.

Had 5 collective BPs on my app with one other hunter and I am seeing charges for $90…we put in for what others are referring to as poverty hunts for choices 2-5. Also put in for crane and don’t see anything. Anyone get a crane hit?

TTT, $300 for a new, spooled Avet and new rod is a good deal. Buy this boat at my asking price and you can have the rod/reel. I will be in PHX Sat. 7.15 if anyone wants the rod/reel...

TTT, thanks everyone! I have a free Vortex ball head suitable for 10x or less, a Bowmaster bowpress, $25, outboard motor stand, $50, Vortex Bubble level $10, and an old MTN bike ($150) left.

Sold

2nd owner, always garage kept, set up to fish...recently purchased a bow mount troller (thanks AZLance!) and while setting it up I contemplated my opportunites to fish this summer and came up with none. Just not using it...would consider trades for a travel trailer, jumping jack trailer, or shorted bed 4x4 truck. 6K info is here: https://tucson.craigslist.org/boa/d/tucson-klamath-155-advantage-fishing/7634044182.html SOLD

Bump for the Avet Reel & Rod combo. I have 3 outfits like this and killed a ton of YFT on 3/4 and overnight boats with my other Avet SX and 10-30 Seeker Pinhead.

TTT Daiwa rod is SPF Will be in PHX on 6.16

gone