Siwash

Looking for a reference on a roof repair/recoating company in Tucson. Home is a mid-town 50s adobe with a flat roof. Probs close to 3K total sq ft including carport. If anyone is in the industry or has worked with someone honest/reliable please let me know. Also, I have personally rolled on new coats, at this point the roof needs some leveling, etc as I'm getting pockets that will require someone with a little more know how. And I know right now with the cold temps is not a good time to do the work, I'm just planning for the spring. Thanks for reading.

Thanks, it looks like your PMs are full.

TTT great minimalist shelter for a pack in trip or handy to stash under the seat if a vehicle or boat just in case. Got it as a gift but I already have a Kelty Noah’s Tarp.

In have some T3 high Warne 1” rings for a Tikka you can have, they work great for a 50mm bell. PM me if you want them. Also have a T3 DNZ 1” high set up, would sell for $20, worked with a 50mm bell. I switched to 30mm scopes on both my Tikkas, hence the leftovers...might have a 0moa EGW rail for a T3 laying around too.

Looking for a short shaft 4stroke 5-6hp outboard: yamaha, tohatsu, suzuki, etc. Figured I would give this a shot before I tried purchasing online. Thanks for looking.

SOLD Up for sale is a CZ 452 2E chambered in .22LR. Mannlicher stock. 2nd owner, total round count is less than 600. No major dings on stock or scratches on barrel/receiver. Comes with one 5 rnd magazine, Millet rings and a USA made Weaver Marksman 4x32 scope. They do not make this model anymore. Rife has spent most of its life in the safe but it is extremely accurate when it does get shot. $450 firm. Rifle is in Tucson but I will be in downtown PHX Saturday AM and then headed up to Payson that afternoon. Thanks for looking. SOLD

The only thing I need is a 5 or 6hp short shaft 4 stroke outboard, but feel free to PM me a trade offer.

fished 1.5 day on the Producer out of HM this past weekend. BFT limits at 120 miles west of Point Loma. no rats but no cows, jackpot was a little over 50# most fish in the 20s with a few 40+. 80% fish were fly lined a handful on flat falls. blue shark worked the open bite for 90 minutes but didn't poach any fish. the boat has a trip scheduled for this weekend, its a solid boat with comfy bunks a good cook and friendly deckhands. Go get some. PM if you want any info on the boat or this type of trip. https://www.hmlanding.com/trip-calendar

TTT for DNZ

for sale or trade in Tucson: 1. Kuiu XL Bino Harness in Major Brown, tested at home never in the field, pretty much new: https://www.kuiu.com/shop/mountain-gear/bino-harness/bino-harness/80010-MB-XL.html $65 shipped would trade for two pounds of H4350 or R22. 2. DNZ Tikka 1" High combo mount/rings, worked for a 50mm bell on my T3, mounted/range use only, never took it hunting. https://www.dnzproducts.com/product/game-reaper-tikka/ $30 shipped or would trade for a quality set of low picatinny or weaver mount style 1" rings. Will post real pics later, thanks for looking.

Bino Harness SPF, pics of the DNZ attached.

weekend bump

MNF bump

Friday Bump

gone

TTT

Bump. These are way cheaper than a boat or canoe and much easier to store and transport. Trades for hunting/saltwater fishing or firearms considered.

TTT for some new pics.

For sale or trade in Tucson: 1. Badlands Inferno Realtra Xtra Jacket, Size Large. Worn for one weekend on a youth turkey hunt, as new no stains/tears, etc. $35 2. Tikka T3 Stuff -EGW 0 MOA Rail. Never hunted with but was mounted, did dremel off the last section as it prelcuded the objective of the scope I had on the rifle from clearing. $15 -Warne Maxima 1" Permanent Ring Mounts, High. hunted with for a few years but in good shape. $15. -Free if you buy both of the above: Limbsaver T3 recoil pad. Used and it shows but not tacky/flaky and way better than the factory ones. 3. FREE: euro skull mount. You can have everything listed for $60. Would trade for IMR 4831, H4350, R22 or 9mm ammo. Thanks for looking.

^^^what he said. They can be somewhat challenging to mount in comparison to other styles, but once you have your scope leveled torque to specs and they are pretty much bombproof.

not muffs or electronic but had these on at the range the last few trips and been pleased with the performance: https://www.midwayusa.com/product/187765/otis-earshield-ear-plugs-nrr-31-db

Can anyone provide the suggested OACL for the following calibers/bullets? I switched computers and lost the darn e-book I had of the 10th edition of the Hornady manual. 143gr ELD-X in 6.5x284 If memory serves it was 2.875" or something... 178gr ELD-X in .300 WSM, again wanna say it was shorter than most factory loads...2830" or so. Thanks if anyone can help...I'm using H4350 for the 6.5x284 and will probably use that or R22 for the .300WSM.

thanks, good to know my memory still works too.

they are harder to see if you shoot steel I havent not noticed any difference in loading them versus any other type of bullet. And they do shoot well and perform great on big game