gauchoand

TTT with price drops added in

We should edit the above to say:" Them extending the deadline pleases those who have tried to put in on time per the requirements set by AZGFD but we're unable to because of their crappy system and screws no one because they prepared and put in weeks ago."

Following is sold everything else still up. Tress stand Bow case 12g shells

Yes for AR

I have 2 thousand 55 gr Hornady FMJ-BT with the cannelure I will not be reloading. I have already loaded 3k of em and I'm not shooting as much as I hoped these were purchased about a year ago and are new manufacture not pulls. $195 the lot of 2k If you need brass or primers to go with I have some but would like to keep them, but if it's a deal breaker I'd part with them. Brass is once fired lake city 13 and primers are wolf 223.

Sorry I'll pass I'm full of bullets

I like this table http://www.chuckhawks.com/recoil_table.htm

Have the following for sale. Brass: (All once fired) 500 .40cal mixed headstamp $30 160 - 300 Win Mag mixed headstamp 70 Aprox. primed ready to load. $100 1k - 5.56 LC deprimed and swaged $110 1k - 5.56 LC non processed. $95 250 - 300blackout $45 Bullets: 1k- 223 Hornady 55grn FMJBT $110 700 - 180grn Berrys 40cal round nose $80 150+ 175grn 308 Hornady Amax pulls some show heavy crimp marks $40 Primers: 1k - Wolf 223 primers $35 500- CCI large pistol primers $18 700- CCI small pistol primers $23 Lyman 2 die 300 mag set $25

This

Stomp I was really jealous of that setup until I saw the two pellet guns on the wall. Now I'm a little disappointed and still really jealous.

Also interested I've been wanting something like this for the wife. If your near me I'd take it.

I don't know if this would have helped but I've had problems with brass sticking in a 7mm mag (and I mean STUCK). My go to is a chest freezer. Just drop the entire gun in for about 20minutes take it and cycle the bolt. 90% of the time this will pull it right out other 10% it needs a tap with the cleaning rod. I actually think this was a tip I picked up here. It has to do with the differences in the brass and steel brass contracts more in the cold.

I have a stripped lower I'd be willing to part with but I would want it transferred out of my name if I were to sell.

Make an offer I'm flexible on pricing

Stuff for Sale Located near Sportsmans warehouse 101 and 17 Calling gear- Cass creek battery speaker, Cass creek caller Johnny stewart remote control caller, Mini phantom with extra calls all together $85 Archery stuff - Spot Hogg “hogg it” 5 pin site $100 - Raptor Extreme sight New never mounted $45 - True fire release $40 - Tarantula Hip quiver w belt $25 - Bow jax stabilizer $15 Reloading stuff - Winchester .224 55gr FMJ boattail bullets w/ cannelure have 500 $65 -Sierra 50gr Semi point .224 number#1320 New Box $18 - Wolf .223 small rifle primers Unopened box $35 - Sierra .224 45gr spitzer maybe 20 in box free with any of above Optics -Bushnell Legend 8x42 with case and caps $140 -Nikon prostaff rangefinder 440 with case and manual glass is good $90 - Vortex Strikefire New in Box $125 -Eotech 512 A65 3 months old tried it out $365 AR stuff - Brand new test fired only PSA upper Premium chrome lined FN barrel midlength gas with charging handle and BCG $475 $575 with the vortex strikefire - 223 stripper clips 50 with spoon $10 Climbing tree stand not much info on it bought here a while ago comes with a harness $55 WTT have three boxes of Mini Mag would like to trade for a bulk box. This stuff was given to me I bet someone here has use for this stuff I only need a bulk box in an equivalent retail value (not gouger value) no need to sell will shoot if noone wants to trade Free to anyone who buys anything else can take one of these: -Cobra walkie talkies these work but the charging cord melted on me so its gone -Cobra radar detector with cord -Box of Winchester 12 g shells see picture

Back up nothing's gone yet here.

If interested in selling let me know how much you would want for it. It would be a shame to pull it apart and waste the components.

I think a progressive press will have a pretty steep learning curve, I would start with a single stage til you figure things out. Less overall start up cost so if you don't like not as big a deal. I started with a single stage and now have a turret press that I think is as far as I will go because I just don't do much pistol reloading to benefit from a progressive.

i have done this thousands of times with my 556 and i still have 8 fingers.... seriously though. never had any issues but also a different bear.

Cabelas black Friday has a deal.... Good luck with that

sconds on scale

So this represents that last few years of a Mild Black Rifle addiction: Im gonna count these Left to Right of first picture: (any mounted optics are not included) 1-16" 416 Stainless steel fluted barrel. 5.56 NATO 1/9 twist. Picatinney railed gas block. A3 Flat top upper receiver. All aluminum parts are anodized and all steel parts are phosphate coated or parkerized. The flash hider is a stainless black rain ordnance. AFG not included $550 2 and 7 - BRAND NEW bought for platform for new builds- PSA Premium PRO 16'' 5.56mm 1:7 Mid-length A2 Profile Barrel: 16" Mil-spec barrel steel, A2 profile, chambered in 5.56 NATO, with a 1/7 twist, chrome lined bore and M4 barrel extension. Barrel made by FN Herstal Manufacturing, the barrels are high pressure tested, mag particle inspected these barrels are the real deal, f-marked, front sight post, standard mid handguards, and an A2 flash hider. Forged AR MIL-SPEC upper. These have only been test fired at the after assembly $475 3-18 SPR upper, midlength gas, 18" CMMG SPR barrel, 5.56, 1-8 twist, Daniel defense comp/FH, Troy MRF free float rail, with machined QD mounts, $600 4-Rainier Arms M4A3 receiver, S&W chrome lined 5.56 16" 1/9 M4 barrel. YHM low pro gas block. PRI 3rd gen carbon fiber Free Float tube with two rails (Top & Bottom)The rail is painted tan and can be removed if you want. Everything is in great shape but the rail does have some paint nicks. The bottom rail is not in the pic but I will include it. Warning: the barrel is not marked with a S&W logo. It was sold to me as a S&W barrel. It is marked: 5.56 Nato 1/9. $525 5-VytamenC Tactical 7.5' upper and Barrel. Double star Hawg flash hider. Pistol length gas. Cant recall much more about this upper. $500 6-PSA 10.5' upper. Barrel is PSA 5.56 NATO1/7 MP CHF CL. The FH is a YHM Phantom that is not pinned. The gas block is low profile and fits under the free floating Troy VTAC handguard. The upper will come with extra rail sections for the VTAC. $600 Any of the Uppers can include a CH and BCG for an extra 125 EXTRA stuff sprinkled around in the pictures: MI industries BUIS $170 Trijicon ACOG 4x32 TA01 $850 Trijicon RMR Dual illuminated Amber 9 MOA $400 Vortex Strikfire New $150 Used $125 Aimpoint PRO Brand New mounted never used $385 Magpul FDE Buis $35 CMMG 11.5 5.56nato barrel 1/7 twist no FH $160 Stripped upper New $85 Surefire Drop in carbine length quad rail $130 Railed gas block with gas tube $50 Barrel nut and delta ring $18 BCG full auto all New $130 Tango down vertical grip FDE $50 Streamlight polytac FDE w/ pressure Switch GGG mount $100

Out shooting the AR today. Using my reloads. Recipe was 24.5 grns Win 748 Wolf small magnum primers, Sierra 55grn bullets in LC brass. Ultrasonically cleaning baked in oven at 180 for a hour after to dry. Here's what happened, shooting fine time 40-45 rounds in. Pull trigger nothing. Pull back charging handle out pops a shell with no bullet in it. I think it was a failure to eject as case had apparently normal dimple in primer. And let the charging handle load another round without much thought. Pull trigger nothing happens. (luckily) So I pull my mag and pull out an unfired shell with the slightest dimpling of primer. But notice chamber is full of this black and yellow powder. Never seen that before. Pull the gun apart and look down barrel and see a bullet stuck in the throat. Never seen this before so I clear it and go back to shooting. A few rounds later and the exact scenario happens again. At this point I've never seem this before. Suggestions on cause. Firing pin? Bad loads? Thoughts? What's with the yellow powder? contamination? Help me cause this can't be safe. I've shot roughly 2-300 of these exact loads up to this point without any of these issues.

What are you looking for I believe I have about 8 or so that are currently without a lower I might be willing to part with one or rearrange some parts around for the one you want.

Wolf primers were all I could find during january. After researching it online a lot of people Suggested that for ARs the best wolf primer was the magnum primers. Last I checked where I got them from they were only a few dollars less than the CCIs.