stalkincoues

Back up. Guaranteed to shoot 1 hole groups.... as long as you only shoot 1 shot lol.

Bump

Ya these LWHs are sweet little guns. This one is a sharp looking gun for sure. Love my other in .260

SPF

Bump

Bump

I'll take them. PM sent

Thanks I have found a lot of off these forms that had some good info. I emailed berger yesterday to see if they had any load data for the 195s or if it was in their new reloading manual should hear something back from them tomorrow I assume. Just an FYI, they won't email unpublished load data anymore. They are more than happy to give you the data over the phone though. I emailed them a while back, never emailed me the info but did call me and leave a voicemail telling me to call back and they would give the the info over the phone.

Built on a 3 lug Browning A-bolt short action that was trued, stainless bead blasted action and barrel to match. Gun itself weighs right at 7lbs 10oz. Action is butter smooth and the 60* bolt throw will spoil you! Very accurate. Approx 140 rounds down the tube. Broke barrel in properly and always slow fired. Gun is very accurate easily capable of .25 moa. Both the 180 Berger Hybrids and hunting Vld's shoot amazing. Killed plenty of animals from 205 yards to 987 yards -26" Lilja 1:9" twist #4 contour 3 groove hand lapped match grade barrel that was cryogenically treated (cold bore shot hits the same hole as others) -W/muzzle brake -2lb trigger with zero creep, very crisp and super nice (a perfect trigger) -MPI thumbhole stock with Monte Carlo style high cheek comb and Decelerator butt pad. Stock has a great fit and feel with the palm swell and tactical style front grip -31 pieces of fired brass -27 factory Federal loaded Ammo to either fire form or pull for new brass -16 loaded 180 grain Berger Hybrids -26 loaded 180 grain Berger hunting Vld 's -RCBS full length sizing die set Targets were shot at 100 yards Single digit E.S. with this load 180 grain with brake shooting approx 2977 fps Suppressed 3005 fps Gun with brass, loaded factory Ammo, reloads, and dies $1,850 Turnkey package with Zeiss 6.5-20x50 mc duplex scope with turrets, 20 MOA rail, ARC M10 scope rings ($180 Alone new), and scope level $2,450 Bipod not included. Gun only reduced to $1,500

Ok, I'm going to have to keep this after all. My new custom that was built to replace this has an issue and went back. It may or may not be finished in time before hunting season and can't take that chance.

TTT

Bump, if it doesn’t sell soon I’ll probably just keep it. It’s my go to gun and keeps piling up the animals.

Back up for the deer hunts

Bump for the weekend

TTT

Ah man, I just bought a Leupold VX3i 4.5-14x40mm CDS SF Windplex 3 days ago, this was one of the other scopes I was looking at. If you would have posted a few days sooner I would have bought this. Great price, especially with all the accessories! GLWS

Wow, beautiful! Gotta love them Browning’s.

Back up to the top for the Elk hunts coming up and the fall results soon. Weve put a few more animals down with it 2017 fall/winter and 2018 spring. Gun now has 14 more rounds fired from hunting, verifying shots, and a group a couple months ago on a hot windy day to double check my shooting against another rifle I was having issues with. Gun only reduced to $1,500 May consider partial trade for a Leupold VX-3i 6.5-20x50 LRP W/TMOA reticle only.

Ok back up for sale, just haven’t had the time to get out and shoot this gun since posting initially.

Pm sent on the seekins rings, I’ll take them.

Its a spartan carbon bipod and I believe is only 5oz. It comes with an adapter that utilizes the sling swivel screw hole or a gunsmith adapter thats mounted into the stock. Mine has the gunsmith adapter set into my stock.I have been looking at these bipods and am going to buy one what height do you have ? And if you got the short do you wish you would have got the taller one ? Also the mount that you have drilled into your stock do you know if it can be drilled into a carbon stock ? I got the short version which is tha 6-9 I believe. Thats the height I shoot with my other bipods as well as in th field. If I need extra height Ill put on a backpack or a couple rocks. Rather have too short and being able to gain elevation easily vs. having a bipod too long during a hunting situation and unable to get positioned properly. Been there done that unfortunately. Im sure it could be drilled in carbon, probably have to talk to your smith or stock manufacturer. I have mine set up to use the ultra light bipod but relocated my swivel sling stud so I can still use my Harris when I want, and to have a sling attachment.

Its a spartan carbon bipod and I believe is only 5oz. It comes with an adapter that utilizes the sling swivel screw hole or a gunsmith adapter thats mounted into the stock. Mine has the gunsmith adapter set into my stock.

Ill second that. I have a Savage LWH in .260 and is one of my all time favorites. Very accurate for a little light gun, have taken It to 1,100 yards for fun and is dead on. Killed a few deer with it, longest was 536 yards and was a chip shot for it. Weighs in at 7lbs 12oz full set up and thats with a 20oz scope plus caps and lightweight bipod. Heres my last group with new brass, not my best but happy since its only a 14X scope and for what it is.

No longer need these. Paid $135 for the Aluminum 6061 trigger guard and titanium action screws. Had to order them from Australia as nobody in the US made them that I could find. The trigger guard and action screws weight 2.4oz and the factory set weighs 1.5oz so you gain less than an oz. Ill sell them together for $100 I can ship them for the cost of USPS small flat rate box which they should fit in. Im in Surprise through Tuesday only. I also have a titanium recoil lug for the A7 that also fits the Tikka T3 as well, also Australian. Will sell for another $15 plus shipping

Trigger guard and action screws SPF, Ti recoil lug for A7/T3 still available.