andyyy

Forget him. I’ll pay… tree fiddy!

Just means true or false, u can configure it as a checkbox in excel or Google sheets to make it clean n easy (set it as “Boolean” instead of string value to get it to work right, I think easiest way is type “=TRUE()” in that cell then use the format painter brush in the rest of the column) also oal=overall length right? If not that’s a good column. I would put it under the bullet heading

brass length, die settings (bushing). crimp as a boolean t/f field. ambient temperature (for the chrono numbers to be more useful)

added stuff, updated what's sold, what's left, price drops etc

just use 3 individual male spades, Crimp the wires so they match the plug setup and plug them into the female part individually. should do the job until the compressor gives

Don’t need much space for a 22 pistol just hit onX find some BLM and a backstop.

unfortunately its nothing new with those older f250s, they've been targeted for a looong time b/c of how easy they are to jack

Man that sucks sorry to hear. tough to replace trucks these days even if insurance doesn't drag you around

that's more than I would have thought. I think i'd stick build it or use one of those metal garage kits, given that price for boxes. it would look nicer too

I have one too, worth it even if have you have other compressors. I burnt it out and they warrantied it within a week u can get it for 200$ with a charger and 2 5ah batteries at Home Depot sometimes, in case you don’t have the m18 system already. The 5ah batteries are worth about 60 a pop and the charger 30.

One of mine took like 2-3 months, the other 6 and last one is still in jail month 3

1/1024th enough to qualify I'm sure

demo hammer n ryobi drill driver combo spf

Batteries, table saw and m18 drill n driver spf

Oh now I understand. I see your old message.

Huh. Is it the FUEL? Mine is the latest model gen 4 I think. If that makes a difference. it is too powerful on the high setting, breaks off lags real quick if I’m not careful

I use my m18 fuel impact driver (not wrench). 1/4 to 1/2 anvil adapter is all I need and it buzzes off lugs that were torqued to 100ftlb even on low settings. Haven’t found a reason to get the dedicated impact wrench since the more versatile driver is so good for occasional stuff. Perfect for tightening bolts on bottom plates too. to answer your question , I use the medium setting; if I hold the trigger for a second or two once snugged up it ends up being around 100lbft based on comparing with torque wrench at home . Good enough for the field .

This, optics you get what you pay for.

I have a varmint rem 700 short action you can have for free, I'm in northish PHX I also have a bergara ridge takeoff (new) for 75$

Yep, there's no comparison. Take them apart one after the other and it's obvious why. A lot rougher

"Tracks well", you dialing for running yotes? 😵 (just joshing u) I mostly hunt predators and IMO a BDC reticle or MOA/MIL Christmas tree or hashmark reticle is the best. You never know if something will come within 10 ft (had a lion do that, charging in) or run crossways at 300yd like a yote trying to circle you. 2nd focal plane Zeiss v4 with illumination and a hash reticle is what I use. Anything along those lines. I used to use an ultralight 2.5-10 swfa but not durable enough for going stand to stand in rough terrain. Lost zero bumping around, etc. Fantastic scope but pred hunting in AZ is not what it's for. Need a solidly built scope IMO. I would avoid the lightweight leupolds for that reason. If I had the budget I'd have one of the lower magnification nightforces.

A400, once you shoot one it's hard to use anything else. The gas system and the springs in the stock really temper recoil. Incredible fit and finish. A300 isn't bad I have one as a backup but it's not great, f/f and otherwise

Prayers for you and your family, wish you all the best in this trying time

How old is ur buggy and what coverage? Crazy mine is higher, I gotta call and see what's up. Absolutely spotless driving record too

closely related to brown recluse. Necrotic bites