Crazymonkey

My first two right when e- file was open were 8 months . I've currently got one in jail going on two months and another being transferred to a competent ffl so I can use my existing silencerco profile and there kiosk . The kid at the shop the suppressor was sent to thought I could just pick it up and bring it to the other shop. It took two trips to there store and some harsh words to get them to do the form 3 transfer . I didn't get much choice on where silencerco was sending my other can as it was the free one from the buy one get one and there were only 3 locations to pick from. Az guns might sell guns but they definitely don't need to do anything with class 3 or nfa stuff .

Go to far and the shemale is prez!

Hopefully he hit his head and broke his hip or something.

Order a egw rail and run standard rings . The rails you usually can get from Amazon if not egw themselves.

Just 3 weeks left to enter !! You've got till the 31st to get entered. There are over 100 kids entered this year .

Bump for a good rifle at a reasonable price. I built one using alot of the same jp components on a Gibbs side charge upper and probably have close to that much in just the upper . For a gas gun they print really small groups.

Now your talking !!! Can't have to many guns.

I was at mcmillan and Josh was showing me stocks for my 280ai build and said something like that . So I asked what that was about . Answer was comb height in relation to scope with scope as low as possible . Some stocks are made for specific dia scopes. I had never heard of this before about two weeks ago.

Barrel swap it to another caliber or simply trade it for a more desirable rifle. If I didn't already have two 300s I'd have worked a deal for another gun in a different caliber. I'm sure if you tell your dad you worked it into a gun for the grandkids to hunt with he might be OK with the end result.

It's still a cheaper hunt than the pig hunt I did in California .

Someone was looking for one recently on her . Try Phill Carr it was in the classified under wtb

I only picked up the bad words and dos cervesas por pa vor ,que Questa ,and done es un banuo. Never could write it out . Failed Spanish class 2 times.

Just 4 weeks to go !!! Remember to enter at youthgungiveaway@outlook.com. Make sure to use all lower case and just one word . I always send a thank you for your entry . If you don't get a thank you I didn't get your information.

Ordered tacos with extra cheese and sour cream. And some beers 😜. 🍻

Beretta is a solid shotgun . I've got the al 391 tekneys in 20 gauge . With the wood being so nice I don't think I'll ever take it out in the woods. But they are light and absolutely reliable. I find myself talking the 870 that I bought at 21 out or the win sx3 semi auto. That's a good deal for a wood stocked gun .

Sportsmans or bass pro (cabelas) just remember the guys working there are paid by the hour and may or may not be trained to do the work. After a few runs at sportsmans ( stripped screws ,damaged rings ,and a big a$$ scratch in a expensive spuhr mount on my ar10 ) . I don't take anything in to those places to mount scopes. Last years giveaway gun was a prime example .The kid at sportsmans mounted the bases and tightened down the scope crushed the new vortex ( scope 1 ) so I bring it back because scope won't track . Put on scope 2 torqued and that would not track also . Back for scope 3 and same thing. Took gun over to Keith at Phoenix custom rifles and it was 30 seconds and he said the bases were off and two different heights. One custom fit egw rail and a good leupold scope later the gun was finally scoped and shooting good. Sent the scopes back to vortex and then got rid of most of them . I think I've got 1 left on a 338 win mag waiting to be swapped for a decent scope . Sportsmans ,bass pro don't properly mount and align the rings so you never get a good job . Anyone ever see them run a alignment rod to see if the rings are set correctly? I've since started to aquire the correct tools still need alignment bars and ring lapping kit . Word of advice take it to a good gunsmith with the right tools .

Got mine yesterday also.

Thank you to loboscout with LS WILD for the scope covers ,shooting bags ,and various gear for the giveaway

Thank you to loboscout with LS Wild for the various bags and scope covers and all the gear for the giveaway.

Soooooo tempting!!!! I don't need it either nor do I have any room to hide another rifle from the wife . Also if I keep buying guns I'll never get the scope for my 280ai build. I hope someone buys it soon so I don't have to explain the I don't need another gun but I wanted another gun thing to the wife again.

Youthgungiveaway@outlook.com Her name ,age, your name and number to call if she should win.

Just a month to go to get entered in the giveaway. The drawing is the first week of September!!!

Just a month to go to enter the giveaway. Drawing is the first week of September !!

I put a glockmeister guide rod and a heavier spring in my g20. I did polish the connector and some of trigger parts . That was lots of years ago . The gun works flawless. It needs a new barrel for some of the specialty rounds so it doesn't load up the barrel. But I usually just run some hollow points .

A little more than I can get away with trying to sneak in another gun . It's sill a deal in that stock