ruppart

Sounds good. Shoot me an IM, and we can figure out a meet-up spot or shipping, depending on your preference.

I have a partial box (~70?) I can send your way. I have sufficient loaded rounds for this season already, and don’t want someone running out. PM me, and we can arrange stuff.

Got this for a build that's now OBE. Taken out of box & wrapper for inspection, but never mounted. $330 if face-to-face here in the SW Phoenix area, or $350 shipped CONUS. Accept USPS MO or PayPal (add 3% if not using gift/friends & family payment). For clear reference concerning which LEAP mount, it is the mount described here. Not interested in any trades.

Unfortunately, those are outside my budget. But they do look nice. The 12x50 ELs offer the promise of a little more light gathering at the expense of a little weight and FOV compared to the 12x42 NPs. Plus, they’re in budget.

These look like just what I’m looking for; I’ll take them. IM me and we can discuss payment, etc.

***SOLD. THANKS!*** Very lightly used on a 22-250. A great scope overall, but not really what I want for the application at hand. The free CDS dial coupon has *not* been used, so a purchaser is free to get their custom dial for their round of choice. Includes original box and butler creek flip-up covers. $725. Can ship CONUS for an extra $20.

I’ll take it.

Still available.

***SOLD PENDING FUNDS*** Have been assembling a section at a time for a while now, with the intention of it being a "basic" AR (iron sights only, etc.). But alas, other urgent expenses have come up that require attention. This build includes: LMT upper with 16" chrome-lined mid-length gas system barrel. Upper has around 1500 rounds through it. Shots very well. No hard use (ie, no mag dumps, etc.). 15" BCM M-Lok handguard (new). Troy flip-up front and rear sights RRA lower (new) with Aero Precision lower parts group (also new), and BCM butt stock, hand grip, and trigger guard. NOTE: everything was put together by a competent gunsmith, not me. Radian 45-deg ambi safety lever PRI gas buster charging handle BCM PNT trigger/hammer (new) 2 30-round magazines Soft case $800 face-to-face in the SW Valley area (Goodyear). Need to see a valid AZ DL and CCW.

***SOLD PENDING FUNDS*** Gently used 10mm Glock 20 (Gen 4). Has around 500 rounds through it. Got this cut for a Trijicon RMR (also works for the identical-footprint Holosun). Slide has been cerakoted in gunmetal grey. Got this fitted with the intent of using it for HAM javelina hunting, but some other expenses have come up that are much more urgent. Includes: Ameriglo night sights 3 15-round magazines Kydex holster and mag carrier 200 rounds of 180gr MagTech JHP ammo Original box $650 face-to-face in the West Valley area. Need to see valid AZ DL and CCL.

I'm in the SW Valley area (Goodyear). I'm 6'8", and it fits me at the max draw (but just barely...). Bows with a draw length beyond 31" seem pretty limited, at least from what I remember. Maybe it's changed in the last few years? Year? Oh, man...2014? In the omg-i-need-the-newest-fastest-fanciest-most-expensive-bow-every-year sense, it's a dinosaur. However, even with the longer/heavier arrows I'm shooting, I seem to remember chrono results of 307 fps with a 400+ grain arrow (when I had it up to 68+ pounds).

***SOLD PENDING FUNDS*** Older PSE Freak, #60-#70. This bow supports normal draw lengths (29") up to, well, freakish draw lengths of 33" (its current setting...yeah, I'm tall). Bow has seen use, but is in great shape except for some wear on the grip. Includes: TiteSpot quiver QAD UltraRest drop-away rest Black hills 5-pin sight Limb saver stabilizer Scott mongoose release (along with a new strap for it) Tru-flight release (pretty much new) 14 Carbon Express 450 arrows Case Misc parts (nocks, string wax, etc.) Various Montec 125gr broad heads (4 pristine ones, 4-5 more that are "target" broad heads now after being used on animals) Barely used XXL Block target (not pictured) Almost Super tough ultra-custom hand-made arrow holder Had lots of fun with this for a few years (including an antelope!), but lately life isn't going to allow the time & resources for archery hunting, and that's not going to change anytime soon. So if someone drew an elk tag for the fall or just wants to fling some high-tech sticks, check this package out. It's not the latest & greatest hotness, but is a great shooting & forgiving bow. $500 for the whole package.

Have had this for about 20 years, but no place to keep it. Anyone have a use for a professionally tanned cow elk hide? As the title says, it's free to a good home.

Cleaning out my reloading bench of things I'm not going to use. Figure it's better to offer them to others since components are hard to find right now. 30 cal Speer 165gr Hotcors and BTSPs (100 BTSPs and 76 Hotcors). $45. 91 120gr 7mm Nosler Ballistic Tips. $40. 100 Hornady 200gr XTPs. $30. I live in the extreme West Valley, but am happy to ship to anyone interested for a whatever USPS flat-rate will cost.

Oh, thanks! I forgot that important part. Cut was done by Southwest Precision out here in the West Valley. Website here.

***SOLD. THANKS!*** Older set of 15x56 Swaros (the non-HD versions for a while back). These have seen a lot of hunts and a lot of miles, but are in very good condition as they've always been in either their case in my pack on or a tripod. Glass is for both objectives and eyepieces is pretty much perfect; always cleaned with a lens pen and/or cleaning solution and appropriate lens cloth. Includes the original box and case. $1200. Can ship to anywhere CONUS for $20. IM me for pictures. Tried uploading, but for some reason uploads are not working for me today. Never mind; got 'em loaded.

Sorry I don’t have any 6.5 to trade. But if you’re interested in selling the primers outright, let me know because I’ll take them.

Just in case anyone needs any. Also some smatterings of WSM loadings available. No 6.5 offerings, though.

If none of the factory rounds are available, I have some 120 nosler ballistic tips, brass, primers, and some appropriate powders. I can assemble something to get your son in the field.

Got this rifle a little over a year ago, but found I like the balance of the T3x Lite (no fluting) a little better in the B&C stock my rifles usually wear. Great little rifle, though. Would keep this one around for my son, except he's not interested in hunting big game. Applied some of Brownell's black Alumi-Hyde to remove what I perceived to be too much glare off of the original brushed stainless finish. In that sense the finish is functional, but in no way aesthetically beautiful. However, it probably would be too hard to remove if the original finish was desired. Rifle shots very well with factory Federal Premium 140 gr Nosler Accubonds, and RL17 & 150 gr Partitions/Ballistic Tips. However, it's strong preference in my limited load experiments was for RL17 & 160 Accubonds (which accounted for a nice 3-pt Muley last year). Total rounds through the rifle is a little shy of 150. Includes the pictured Tally rings, pictured soft case, and the original box. $490 face-to-face in the West Valley area. No trades, please.

Like new, only 200 rounds fired. This is the non-optic cut version, shown here. Includes all the in-box components (attachable flared magazine well, back straps, extra magazine, etc.). Great little pistol, with excellent ergos, texture, etc. Just found I have a little better trigger reach from my gen 5 glocks when using their large back strap (have very large hands). IM for pictures if interested. $550 FTF in the West Phoenix area. Will bring valid AZ ID, and will need to see the same from a buyer. No trades.

Sold to hvyhlr. Thanks, everyone!

Like new, includes box/sunshade/manual. Got this to play with on a 22-250. Very nice and clear scope, and not too heavy for use on a lighter weight rifle. Not quite what I ended up wanting for this particular rifle, though. No ring marks, glass is pristine, and exterior is spotless. $600 face-to-face in SW Valley area, or $625 shipped USPS. Not interested in trades.

IM incoming. If still available, I'll take it.

Still available.