Nitemann

Thanks, last I heard they were not allowing foot traffic in the store.

Matt can you actually go into Bruno's and buy items or does everything have to be purchased online and shipped?

What part of the White Mountains?

Found a set. AZooutdoors thanks for the offer but I have no need for the barrel. I bet the 44-40 is a lot of fun. Take care everyone. Rick

Still searching.

Frank Glenn also does excellent work.

You can also do a 6.5-280AI. Just run 280AI brass through a 280AI bushing die with the correct bushing, load and shoot. No fireforming and basically a 6.5-06 AI. Todd South built mine and has the reamer.

Burris gloss, fixed 12X Fullfield (Not FF-II) rifle scope, A/O, 1" tube, duplex reticle, target turrets. $250 or possible trade for Leupold/Burris pistol scope, TC contender barrel (rifle or pistol), reloading powder/bullets or ???? Located in Mesa.

Last bump.

Up for the after Xmas crowd.

I'll take it per PM. Thanks

218 Bee was impossible to find until Hornady started making it. Either one will work but the 32-20 is a lot cheaper and you would probably need a tapered expander for the 218Bee brass. Biggest issue will be finding bullets since most places have discontinued them (love the Speer 75gr flat point). Fortunately several companies make cast bullets. This all assuming your shooting a lever gun.

You can easily make 25-20 from 32-20 brass and starline usually has it available. Just run the lubed case into your seating die to start reducing the case mouth diameter then run a lubed case into your full length sizer with the decapping assembly removed ( if you don't do this it will crush the case). Check for length and trim if needed. Then full length size the case with a decapping assembly in place and check for function in your firearm. Then load and shoot.

If you separate I would be interested in the scope.

This is very accurate ammo. I was told one time it was actually match ammo made in Russia for one of the top match rimfire folks like SSK/Wolf. Not sure how it works in semi autos as it has a very heavy lube on the bullets. I only have 2 50rd boxes left out of the case I bought back in the early nineties for $5.00 a brick from a gun store that was going out of business. Wish I had bought all of it but wasn't sure if it was any good coming from Russia, my mistake.

Price?

I'll take them all per our phone call. Thanks

If that's $30 for all 3 boxes of Nosler 30 cal and your in the east valley i'll take them.

Tim i'll take them all for $140. I'll give you a call this evening and reply to our PM as well. Thanks

Looking for a factory sporter barrel RH Rem 700 LA ADL stock.. Not sure if I want a factory synthetic, wood or after market. Let me know what you have.

Thanks Viper, that is a BDL stock and you correct it will not work. 452b264 fixed me up so i'm good. Thanks everyone.

452b264 sent you a PM.

Not sure what makes it an ADL. Viper the ADL does not have a floor plate like the BDL. Trigger guard only.

Viper I sent you a PM.

ibowhuntaz I sent you a PM. 1denogean i'm in Mesa.