HAWKEN

Thanks

+100 on 49ford8n! I sent him here and can vouch for his honesty and integrity!

SPF

Older Generac 4000 W generator. Tecumse engine. Was used to power my old camper. Would run the AC and the microwave. Would like to get $300. I have it also posted on our community website in Queen creek. Has a thumb adjustable main jet for altitude. Would trade .223 at $. 25/ round factory!😁 IMG_3963.MOV

C’mon folks… you can let this thing sit for 5 years, put some fresh gas in it, and it will start in 2 pulls! Nobody needs this thing for a cabin or something? $200???

I have experienced issues where the gas takes a long time to charge the line up to the pilot light. What I have done in the past is held a flame underneath the thermocouple until the unit valve opens and fires. Those 6” grill lighters work well. there may still a pilot light that lights with the electronica spark. Then the pilot heats the thermal couple before it will allow the valve to open. This is to ensure that there is enough heat to burn the gas. Also, wasps and spiders like to clog up the works sometimes.

Guys, I spent 15 years in the small engine industry.... ethanol in the fuel is the biggest problem! The seals in the carb, fuel lines, etc were designed for gasoline and not alcohol. Use true fuel or stabil in your small engines. If you get up to areas like Sedona that have ethanol free fuel, fill up there! Otherwise, clean and rebuild carbs and fuel systems and it will take care of most problems!... run your carbs dry after use if you have a fuel shut off. Empty tanks if using pump gas. It’s not like the old days where leaving the fuel system full was a good idea! The ethanol in the fuel will actually absorb water from the air and even through plastic fuel tanks and rubber lines. Once the ethanol reaches a saturation point with the water the water will separate and severely corrode any aluminum in your fuel system. If you find an engine that is very low hours and does not run, it is most generally the carb is plugged up with corrosion and is an easy fix for somebody that has very little mechanical ability.

I have 2, 50 round boxes of federal I’d like to trade for 2, 20 round boxes of .243 best way to reach is text. I’m in Queen Creek and don’t really want to drive far. Thanks, Bret 480 298 37O8

Thanks guys, this has been traded

$3800??

Thinking about selling my 2000 Honda XR650 R. As far as I know, I am the second owner... first owner was afraid of it. I’ve owned for about 13-14 years. The bike has been used but very well taken care of and has a Baja designs street legal kit installed. Also has passenger pegs. I have used it for off road mainly and occasionally commuting to work. It has a current tag. Includes a rear paddle which I have never used but got with the bike, and a desert tank with petcock and mounting hardware which was used for my longer rides with full price offer. Not looking for trades. Would rather deal with y’all than Craigslist! I have never changed sprockets, so you can see it’s never been ridden hard or put away wet!!😁 Bret text or call is best 480 two nine eight 3708 queen creek IMG_3364.MOV

Pics please

They will quiet down after shooting the oil out. Put 10 rounds through it into the ground

A week or 2 return? That seems too fast! We’ve always hung for 2 weeks minimum!

Sent you a message.

Recall repair?

Trying to figure out what the kids can do without for Christmas!😂

Perfect, thanks! I’m pretty sure that’s it. They come with 3/8 or .325.

Can you tell me the chain pitch and drive link count on the stihl? Should be 3/8p-xx or 325-xx Thanks!

Brent is a great guy to deal with.

Message sent.

Does that pump self prime?

Why not just use gravity?

Sent you a message

Thanks man!!!! My son went crazy!!! Just like Daddy’s!