Delw

if your broke 3 bits taking it off something tells me your bottoming out or your stripped. I'll be at my shop in glendale in a few hours (67th and northern)or so till late. if your close and want to drive down for a second opinion give me a buzz at 602-505-7499. if the screws are too long I can grind one down. wont take but a few mins. we(you and I) can easily get it working before bedding.

The ONLY fair SYSTEM is eliminating ALL bonus points making every one equal. Thats a Start A true fair system would be to just put in for a Elk tag and you get what is drawn wether is be early late cow bull rifle muzzy archery etc etc.

So Far I got the power line tag ;)

Yeah flowers and alot of butt kissing cause in a week or 2 when she figures out it was NOT her fault is was yours(women are slow in the thinking process ). as you used the credit card to put in for the apps and even entered the date a FIVE TIMES for the 5 APPS.

WFC do you do roofing by chance?

maybe he does flooring, since the roofing part was taken care of a few weeks ago

well in the 1st place kids shouldnt be on the internet. second place neither should women or Susans thats what fagbook is for. if your stupid enough to allow kids on any internet device than they either old enough to understand or your just dumb.

Best answer of all time and the one thats makes most sense. Apply that to any female you think you want to talk to.

yes he will. once you talk to her at all, you invited unwanted drama into your life. unless you like drama dont even reply. your not being Rude or cold. Block that Number dont change your number if you do send her the f'n bill for your inconvience cost and time. I

And make sure you ask How much to buy the gun back after all he isnt sing it anymore. Stay the f'k away Shes a liberial and hates guns, she is going to blame you and put a guilt trip on you. Dont talk to her at all. if she persists block her phone number. if there was a problem the cops would have gotten ahold of you by now.

CoronaVirus? he did have a time share in mexico maybe he went there to get his roof done?

It got expensive the Day my Daughter go into it. but she bought all her own stuff. think hunting arrows are expensive try easton x-10's looks like they came down in price a hundred or so in the last 3-4 years. I like gold tips there supper accurate, havent shot them my self but daughter has about 6 dozen of them at the house.. I shoot FMJs as I dont like Carbon arrows there good enough for me and hunting. one thing while most think they can fletch it takes time to learn the technique and good tools are a must, not the cheesy plastic ones either. most factory fletched arrows from the main suppliers are way better than a guy can do with his own tools at home. Unless of course you have experience in fletching and shoot lots of arrows.

You know you might want to hit up longshooter, he and Trphyhntr were looking for mens rings

I read earllier they had another BOOM today and they also showed video of something streaking through the sky.

from payson, saw it on another forum

Azcentral earlier had 2 stories about it. the org story and then another one. the one story said it was the size of a microwave and registered a 3.2 on the richtor scale. I just went back to look and cant find either story on the front page. they both were there about 6pm That had to leave a big butt hole ????????

if your into the DYI medical stuff we could build you a plate and bone screws, might save you a few bucks too that really sucks, after a little heart problem wife wouldn't let me hunt alone or with the kids cause they were young, so I taught my 8 year old at the time how to drive. Then after thats she was like well that will just leave you out there cause she cant move ya. I told her that's what the paracord is for ties it to my leg and drag me out with the truck. see honey I thought of everything seriously good luck on your recovery

it looks like the screw was too long and didnt tighten it down bottoming out or you have a burr or junk between the receiver and the rail. Looks at the picture of the receiver and the radius of that rail they look extremely close. its showing you have air 360 degrees around the screw. a few thing to look at before you bed it on. put it on and look to see if it touchs any part of the receiver. look at the bottom of the rail to make sure there are absolutely no burrs or nicks,. hit it with some sand paper or scotch brite. if this is a Cheap non name brand rail you may have some issues with it matching the reciever not because its bent as a bent rail the screws will pull it down to the receiver . it could have a step from the machining process which nothing will help unless you have the rail re machined or you find the dia of your action get a pcs of metal .010-.025 smaller dia and lap the rail to it running wet dry 180 grit paper with water. what ever you do, bedding it to the reciever with help. unless your screw bottomed out then you will have to grind a tad of the bottom of the screw

Oh thats good, I only had 200 yards of paracord, I was thinking of winching you back with daughters jeep. ;)

he just text me, they just now got him to a vehicle.

he might be a little late as I heard he had to stop and pick up rooseveltmark on the way ;)

about 15 mins ago they found him, Havent heard if they got him to a vehicle yet.

Just txted him .his son and and another person is on there way, , he thinks cruches will work. said he would update

That looks to be the org barrel, Ruger made them one year(blued action stainless barrel) before going to the stainless actions. the made them for about 1 year give or take a few months. I have one in .220 swift (think its a 1-14) and one in 25-06 still NIB from the same year. then a few when they went to the stainless actions to match the barrels. I love the blue reciever with the stainless barrel wish they hadn't changed. My other stainless ones from 1 and 2 years after this year shoot the same. and the stainless is slightly more of a matte finish. I was told by my wholesaler that the reason for the blued receiver was because ruger hadnt had there stainless receivers finished in time and they were pushing to get out a awsum P-dog Varmit gun. the time frame of these guns were when P-dog shooting was at its prime. I met the guys from Ruger shooting these varmit guns up at the babbit ranch many years ago, I was able to shoot the 22-250 and the 220 swift. I already had 2 Remington 700 bld varmit guns in 22-250 so had my wholesaler get me the .220 swift. tried to get a 22-250. so got a 25-06 but they were sold out before they hit the market. I got thousands of round through my 220 swift running 55 grain noslers ballistic tips and it still makes one hole groups from the day I bought it. Bore still looks like new. If I recall I am running about 3800 FPS. My 22-250 Remington I am on my 2nds barrel (bought same year shot same amount, the other one had 3 or 4 barrles on it but was 3 years older. Ruger Barrels last far longer than the Remington 700's free bump along with some info.

LMAO why doesn't it surprise me. The article is quite an interesting read