bowhunter-tw

Anybody have a phonescope adapter or case that will fit an iphone 15?

Swaro slc 15’s

Assuming the 30-30 sold?

$400 new never opened. Listing for my dad, currently at their house off 132nd st and shea but I can pick it up and meet near tempe; whichever is easier. Sorry in advance on the pictures… not sure how to fix

Gone!

Ttt

Updated picture. Obo

Looking to rent a wall tent for late rifle hunt (11/29-12/6) one with a wood burning stove preffered

They are great, big step up from the bass pro mighty bite. My dad ended up with two of the same model so selling the second un-used one.

75 eldm’s sold 475 - 60gr vmax available $18 per 100 $14 for the opened box about 75 bullets Located in tempe

Hp38 and No 7 about half full - $15 ea others are un opened - $30 each universal sold located in tempe

Ttt

Price drop. Would also be open to trade for rem700 trigger.

Ttt open to offers or trades on the Vmax. Would trade for 6mm or 6.5mm projectiles.

Ended up getting the Maven RF1. Like it so far. The knob is a little weird on the side but nice for changing settings. Very clear glass and ranges way out there

Anybody seen a primer do this? Looks like two little pin holes at the 5 and 7 oclock position where gas escaped past the primer. Heavy bolt lift and ejector mark at the 12 o clock

Good to know, wouldnt have figured it was that sensitive. I probably should get some nicer calipers. Will check when im home from work. I appreciate the info

Do you mean 8 thou? (.008”) 8 tenths is so small my calipers probably wont measure that accurately. I did not wet tumble. Max load on this is 42.9 C my COL keeps this load from being compressed

260rem, IMR4350, 41.5gr, 143gr eldx, I might have been into the lands. I just re checked and I only had a .005” jump on the few that were still loaded. Theres a chance that one was seated long

It looks like it did pit the bolt face a little

I did, unfortunately I cant remember now if it errored on that one or velocity was inline with the others. All the loads that read were on par with one another

I will go back and double check, but should be same headstamp, dont think it pitted the bolt face, and I am using a frankford intellidropper, which has been pretty consistent. Maybe that case had more somehow.

Would a pinholes primer also exhibit false over pressure symptoms? The other loads of the same charge and primers did not show pressure signs.

They are winchester primers. Older ones from the condition of the box and logo

Yes, they seem to show some signs of exposure to moisture. Figured either they will go off or not. But would not see an increase in pressure