bowhunter-tw

Man you must have the same taste as I do lol first the 300blk then the single action 357 😂

Maybe yall can help me ubderstand what might be going on… rifle is a browning A bolt in 7 Rem mag, 9.5 twist factory barrel. Im using “RP” headstamped brass trimmed and deburred. Hornady 162gr interlock boat tails. I was trying to use the once fired case with a squeezed in neck and bullet to determine my dimension to the lands. I did this a few times and the bullets ends up at the same spot in the case, so I figure this is where my lands start? Then, I seat a bullet in the sized case about .020” deeper. Check it in the chamber and I think im seeing rifling marks?? If I seat it deeper, like another .020” (.040” from lands), there are no marks. So what am I missing? I dont think bullet is moving on extraction when measuring lands

Sharpie seemed to make the marks a little harder to take pictures of. Here is the polished bullet only.

I was polishing them with some fine steel wool, i’ll post a picture of what im seeing here in a few minutes. I will try the sharpie also

Thinking about rebarreling with a barrel nut system, anybody have 223ai go gauge I could borrow or rent if I do? will also be looking for reloading dies if I do it.

Or 223wylde go gauge? Might steer clear of the AI cartridge, I read mixed reviews about feeding issues and not much speed to be gained.

Holy cow, that sounds like it! What grain bullet are you launching out of that cannon?

Have you found quenching to affect the results of annealing? I would have thought quenching should be avoided but never tried it.

Thanks man! If the cash comes up let me know!

I may have one, i’ll look around and let you know.

Anybody know of a reliable rental service for pull behind travel trailers? Planning in advance for a late season unit 9 hunt. We tent camped it last year but are thinking we want to rent a trailer this year, recommendations appreciated.

What makes one all weather vs not? We were thinking about that too, it will definitely be down around 10 degrees at night so dont want to freeze pipes

Was thinking buddy heaters for nights and using the generator for cooking/charging/shower purposes

Thanks for the suggestions, I will be reaching out to them. Trying to get everything set up well in advance

Did anybody find somewhere to look at these in person or is it online only?

Anybody have a lb of trail boss or similar powder?

$1400 $1050 w/o barrel will sell barrel and dies as a package for $450 open to trades custom cerakote paint job forged upper and lower odin works handguard magpul ctr stock aero enhanced buffer kit Adjustable gas block Larue two stage trigger faxon bcg DA Van Horne custom 22” fluted barrel chambered in 6mm AR (not ARC) custom redding reloading dies Optic and mount not included I can help remove barrel and install your barrel if you do not want 6mm. I have a 6.5 grendel bolt and 5.56 bolt. located in tempe

.

Police found the vehicle; no damage besides locks and ignition. Nothing I can see missing as far as I can tell.

Still looking

Looking for ruger ranch 300blk or something similar

Ttt

Also interested in these; do you use it strictly as a shooting tripod or also for glassing?

Looks like maybe 2mi max. Just the distance from my house to the lot they parked in.

Sorry to hear the Fred; I really thought I was in the same boat. Mine is configured exactly as you listed but a 250