Zeke-BE

Long story short Ive been day dreaming about the creedmoor for a few years now. Im getting my .270 worked on this winter, and almost have a load set up for my 300 win mag. But Yesterday I bought a Weatherby Vanguard series 2, 6.5 creedmoor with a 24" barrel. Im also going to order a Bell and Carlson stock here tomorrow. I'm very excited for this rifle for the lighter recoil,(more shooting) instead of my hot load .270 and hot load 300 winmag I picked up Bergers VLD 140 grains, Nosler Accubonds (not LRange) 140 grains, and ordered from Midway ELD-X 143 grains. Im excited for the Bergers, more so for the ELD-x, and maybe just try out the Accubonds. Accubonds are probably my favorite game bullet, and has performed well in my .270 and centered plate 750 yards, so Im still going to give them a shot, but the BC on them is .50 while the BC on the ELD-x and Bergers are in the .61- .62 range. But for my powder question I have is that I have 3 pounds of w760, 1 pound of RE-15, and IMR 4895. Now the bergers book has a load for the 760 and the Nosler book has the Imr 4895, RL 15, and 760. I think ill get around to testing all of these powders because i think its fun trying to find load datas, but to start off with one right now which one do you guys favor more or have had better luck with???

What a Bull!!!!!!!

I was just reloading 100 new Hornady 6.5 creedmoor brass with 210 match primers. My handl held RCBS primer seemed to be having a real hard time seating the primers. It was extremely hard to set it all the way in. Is it common for the brass to be the problem, the primer, or the hand held primer devise?? I haven't had this much problem with priming my 300 win mag a month ago.

I never had this much problem before. Can you educate me on this uniform procedures ?I use the Lyman case prep in the photo below. Only uniform primer pockets 1 time.I have RCBS case prepper but it doesn't have a primer pocket device. Can I order one that will attach to it?I am pretty sure you can. If you have the case prep shown in the picture than I am sure you can order the primer pocket uniformer also shown below. Sportsman's Warehouse probably has them in stock and the thread patter should be the same for the Lyman or RCBS. Awesome thanks! From the spec above it looks like federal is the largest

After a few intense snake encounters October is usually off the list.

I never had this much problem before. Can you educate me on this uniform procedures ?I use the Lyman case prep in the photo below. Only uniform primer pockets 1 time. I have RCBS case prepper but it doesn't have a primer pocket device. Can I order one that will attach to it?

Wow well done

I never had this much problem before. Can you educate me on this uniform procedures ?

Ha ha I was doing just that

I just ordered some online. How is your imr 4451 working out?

You guys need to show a video or a picture because Im lost! Or it could be that im a bit retarded, my wife would confirm that

Hmm I was thinking 760 because I have lots of it but I rather try to hit a better grouping. That would be awesome if I can get .20 groupings

Sportsman has a lot powders but if they don't I'll hit you up

This.But I know a couple guys who run H414 in theirs, which is pretty much identical to W760. I tried H414 in my 6.5 SLR at first too, before I could get my hands on H4350. It worked just fine. If it works fine why Change?? Unless h 4350 worked better for the SLR?

Congrats

I've notice that too

Darn I just ordered mine on amazon and got it today. To bad I didn't see this

Wow! Tell us you COAL and specs with your 300wsm??? Most people cant get the wsm shooting good with the larger bullet. It kicks butt with the 160s-180s from what I've heard. I could be wrong

I don't cry but I just might hearing about this

Best way to learn is feet first

That looks awesome

Congrats well done

Drive to the base of the mountains and glass all day long!!!!!!

Awesome great job on a fine buck

Awesome nice job