Leaderboard

I have a Browning for sale, chambered in 25-06, no BOSS. Stock is in hunting shape, round count is unknown but can't be to high with it being a 25-06. Asking $500 located 83rd and Pinnacle Peak. I can ship on your dime. Manufacturer info in photos.

If you didn’t know, Brownells has the barreled actions on sale every once in a while. That’s the cheapest way sometimes.

I have one I bought from a member here years ago and took it apart to refinish it and lost interest. If I can find it you can have it for $50. Give me a day to pull it together.

I'm probaby going to regret this... I've only put about 30 rounds through it, other then that, round count unknown, if my memory serves me correct it shot sub MOA with 125 BT reloads, and sub MOA with 168 gr hornandy factory ammo. Barreled action cerakoted Sniper Grey h series, bolt coated elite series black out. Timney trigger, has upgraded metal floor plate, pic rail, front and rear sight removed and welded, have the original wood stock, Boyds stock has been bedded at the lug. Asking $1,000, now $70. Located 83rd and Pinnacle Peak.

SOLD- -870 Wingmaster in 16 gauge. Bought it new and have only fired 1 box of shells through it. Only blemish is the small middle bead on the rib was slightly off center so I removed it. No scratches, dings or rust. Comes with full set of factory chokes. Factory recoil pad was a poor fit so had it replaced with a pachmayer pad. Still have original. Gun has a 28 inch barrel. $900. Located in Peoria near 91st Ave and Deer Valley. I just don’t use it so time for it to go to someone who will.

B chamber is slightly smaller than the original chamber. You can shoot the new brass in either chamber, but you will get some case expansion in the original chamber. I don't think the original brass can be shot in a B chamber. And I definitely would not shoot fired brass from the original chamber in a new B chamber. I think most gunsmiths that had an original reamer sent them in for a regrind to the B chamber specs. I would think the only way to get an original reamer is if it is owned by an individual. Even then, Inwould be reluctant to use it, as the new brass is undersized to fit the B Chamber now.

Family movie night, Dune part 1. Prepping for part 2 in the theatre next weekend. Remembered seeing the first version in the theatre as a kid and decided to make an event out of it. Momma killed it, gumbo, stuffed mushrooms and Cajun/hot wings with some chicken dip. Doughnut desert the kid brought.

🤣🤣🤣 This thread made me laugh

All items are gone! CVA black horn breech plug Rifle sling Schrade knife No name knife Wheeler 1" alignment dowels with 1" lapping bar and compound Leupold stainless 1" rings high Talley 30mm medium rings for tikka Small Swiss army knife Outdoor edge gut hook

Considering I have tasted food you have cooked, as well as knowing your background, that praise holds a lot of weight, Hector!

I’d get in touch with arrowhead rifles. They always have sales and are great people.

Unlike you and jdown I actually post hunting content here and I actually hunt. I did wish I had video of the Mt lion incident I had.

.

PSA had a flash sale a few weeks ago for $179. They sold out in like 10 min. Lol.

Do tell? I've searched and searched on this. Have pics?

I didn't count but I bet I was north of 30 for the summer. Only one we killed was 6'1 without the head

If you were in Tucson I would be happy to make a chamber casting and slug the barrel. I can walk you through slugging the barrel. Just use a lead cast bullet larger than the rifle bore. Use a little lubricant and a short wood dowel to start the slug into the bore, and use the long dowel to tap the slug through the bore. I use a set of dial calipers to measure the slug. You can then determine the slug diameter.

I'm not the right person to ask. I think if you use a sxs you need to have your hunting license taken away. Roads are dust with some rock shelfs. There were alot of hunters, I saw over 30 this weekend.

Desert sheep empanadas with chimichuri sauce.

Go find out and tell us how it is

I think he’s talking about “the south” like as in screw your sister south, not southern AZ south.